7 Are you looking for the best watering can for indoor plants? If so, we’ve found a list of great cans that are perfect for tending all your plants.
Let’s check them out…
Table of Contents
|Image||Product||Where to Buy|
|Bloem Aqua Rite Watering Can||View on Amazon|
|Union Elephant Novelty Indoor Watering Can||View on Amazon|
|2-Gallon Green Watering Can||View on Amazon|
|Homarden Copper Colored Watering Can for House Plants||View on Amazon|
|Watering Can with Tulip Design||View on Amazon|
Best Watering Cans for Indoor Plants
This watering can by Bloem holds 144 ounces which is the equivalent of 1.125 gallons. It has a handle that can be held from above or behind so you can find the easiest position to use when watering plants.
The long spout makes it easy to control the flow of water so you don’t have any spills or end up over watering plants. The spout is also quite slim so you can reach plants that are located in tight spaces. It is also made from a single piece of material so there are no seams that could potentially leak. This also makes it much more durable.
The large size makes it easy to water a lot of plants without making multiple trips to the sink to refill the can. Although the can may feel heavy when it is full, you won’t have to worry about water sloshing out when you carry it.
- Comes in 6 different colors to match your home decor
- Made from BPA-free plastic that lasts a long time and prevents color from fading
- Some said the edges where the sides were joined had sharp edges
- A few reported that their watering can size was different from the one displayed
You Might Also Like: Best Planters for Clematis
If you want a cute watering can that stands out while still getting the job done, consider this elephant shaped one. It has an opening on the top so you can easily fill it and the spout is designed to look like an elephant’s trunk.
Because of the long spout, you can reach into bigger pots and get the water right where you want it, whether that’s at the center of the plant or just around the roots. The can will hold approximately half a gallon which is perfect for those who have a few indoor plants that don’t need a lot of water.
The whimsical design makes it perfect for kids to use as well and the small size means they can easily hold it and pour the water. Just seeing this cute elephant can on your table at home is sure to put a smile on your face.
- Cute design makes watering plants a fun task
- Made from plastic that is weather resistant
- It’s lightweight and perfect for smaller gardens or few house plants
- Some said the water spills easily out the spout before the can is filled from the top
- A few reported that water will remain at the feet of the elephant so it must be tipped until it is almost upside down to get all the water out
Also Read: Best Planters for Bonsai
If the inside of your house looks like a jungle or you have a few but large house plants, this green watering can will help you take care of all your plants with ease. It holds 2 gallons so you can fill it once and then water the majority of your plants.
The sturdy handles on the top and side makes it easy to hold with one or both hands, depending on how full you fill it. The white plastic spout at the end allows water to come out like a shower so you can control how much water each plant gets. The spout is removable if you need a steady stream of water.
The hole on top to fill the water is 6 inches so you can quickly fill it from the sink with the water flow at its highest volume.
- Classic watering can with flower design on the side is perfect for plant lovers
- It is sturdy, durable, and long lasting
- The can itself is very lightweight so you can easily move it around the house
- A few people said they received a can with the filling hole on the rear instead of the top
- Some thought the water came out too fast
Related Article: Best Planters for Basil
If you prefer a more unique, sleeker, and modern design to your home decor, this watering can will fit right in. It has a retro design with a very long spout and curled handle that is made from stainless steel and painted with vintage copper paint.
It is a smaller watering can and only holds 1.3 liters of water. This makes it ideal for those with a few plants or a single room in the house. If you have succulents and other small potted plants on a windowsill or countertop, you can keep this watering can nearby to take care of them.
The long spout makes it easy to reach any plant without having to lean over the counter. It’s great for wall mounted planters. You can easily control the flow of water so each plant gets the perfect amount.
The small size and lightweight construction make it ideal for those who can’t hold bigger, heavier watering cans. It’s also small enough so it won’t take up much space and is perfect for those living in an apartment or small house.
- Unique design that is ideal for minimalists and lovers of contemporary decor
- Lightweight and easy to pour water
- Very well made and does not rust if left outdoors
- Holds a small amount of water
- Some said it was difficult to get all the water out
Also Read: Best Planters for Dill
This watering can by Union is made in the USA and holds 1 gallon of water, making it the perfect size for indoor plants. Those who don’t need a large watering can but need something a little bigger than some of the smaller ones will gravitate toward this size.
It is made from plastic and has two handles so you can pour easily depending on how much water is inside. When it is full, hold the top handle so water doesn’t slosh out. But once the water level is lower, use the handle on the back to tip the can fully over and get every drop out.
The beautiful tulip design on the side makes this watering can both functional and beautiful. You won’t feel the need to hide it in a cupboard or storage closet. Instead, you can keep it on the shelf and have it act as a piece of home decor when not in use.
The opening to fill it is conveniently located on the back so the top handle doesn’t get in the way and interfere with water when filling. It is lightweight and sturdy enough to hold water when filled.
- Comes with a replaceable sprinkler head so small plants won’t get drowned
- Comes in 4 colors
- Easy to carry and water does not spill out when full
- Some said the spout poured too slowly
This uniquely shaped watering can may be unlike any you’ve seen before. It resembles a piece of abstract artwork with its curves and angles. However, the narrow spout allows water to be directed right where you want it.
The handle is designed so you can comfortably hold it in one hand without your fingers cramping up or hurting. The smooth edge allows you to grip it tightly and water plants with just a gentle tilt of the wrist. It holds 64 ounces or ½ gallon of water which is a good amount for watering indoor plants.
It is constructed from resin so it will not break or crack easily. The hole at the top is open so it can be conveniently filled and will not leak. The sturdy bottom means it sits level when placed on the floor, desk, or shelf.
- Choose from two vibrant colors: pink or green
- Can be used in your home or office for all indoor plants
- Can mix in plant food with the water easily through the fill area
- At least one person reported that theirs did not have a hole in the top to fill water
- A few thought the pink colored can would be more red but it is actually fuchsia
Take advantage of the simple and minimalist Scandinavian design that IKEA is known for with this watering can. It has an artistic design with rounded edges that gives it an organic and fluid shape reminiscent of running water.
You will want to display this watering can on a shelf near your plants because it is beautiful to look at. It can also be used as a vase or pitcher when not needed to water plants.
The wide open top makes it very easy to fill and you can also mix in plant food or any other nutrients to make your plants healthier. It is lightweight and easy to carry when filled with water.
- Sleek and functional design
- Does not drip
- Good for hard to reach plants
- When filled too full, the water will overflow through the spout because it is open at the top
This 2-in-1 watering can and bucket by Colorwave is perfect for those who want something a little larger and more durable. It acts as a watering can but the spout can be removed to turn it into a bucket that can hold 1.7 gallons of water.
Although it is durable, it is still lightweight so it won’t be too heavy even when full of water. The hanging loop on top allows you to hang it in a cupboard, closet, or on the wall. The handle is covered in vinyl so it’s easy to grip and pick up.
It even collapses to save even more space when stored. The top is partially open so you can quickly fill it from the faucet or garden hose.
- Choose from 7 vibrant colors
- The material flexes and moves with you so water doesn’t slosh
- It doesn’t spill or pray and is very lightweight
- Ideal for homes with small spaces
- Some said the spout leaked
Although this no-spill jug does not look like the average watering can, it has a lot of great benefits. The jug holds up to one gallon of water and can fit under almost any faucet so you can put it in the sink to fill.
Once the jug is full, put on the spout and pick it up by the handle on the side. Because the opening to fill it with water turns into the spout, there is no chance of water spilling out.
The transparent, BPA-free plastic makes it easy to see how much water is inside. You can also add in liquid nutrients and mix them with water to nourish plants while also watering them.
- Can hold more than one gallon so it’s not necessary to fill to the brim
- Truly spill-proof and user friendly
- Great for watering things in tighter or smaller spaces
- Very easy to fill and use right away
- Some thought it was too expensive
- A few reported that, depending on how the cap it attached, the pour spout and handle don’t always line up
Things to Consider When Choosing the a Watering Can for Indoor Plants
The amount of water the can can hold is a big factor because a larger can will mean fewer trips to refill it. If you have a lot of plants, look for a large watering can so you can water all of them at one time.
If you have fewer plants or small ones that don’t need a lot of water, opt for something that only holds a few cups. This will allow you to give your plants the perfect amount of water because only a little bit will flow out at a time.
Also See: 7 Best Pots for Aloe Vera Plants
Many people love to display their watering can on a shelf near their plants. If you have planters, you may want to keep the can nearby. So choosing a nice style that is beautiful to look at will make the experience of keeping a garden more pleasant.
You will also look forward to using the watering can which ensures that your plants will always be taken care of. A nice style also adds a touch of decoration to your home and you won’t feel the need to hide the can away in a cupboard or cabinet to keep it out of sight.
Any watering can should be stable when it is both full and empty. The balance will make it easier to carry. It should also remain balanced as the water is depleted so you won’t have to adjust as you pour. When empty, it shouldn’t be easy to tip over either.
Water is very heavy and when the watering can becomes full, it may become hard to lift if you have a can that holds a lot of water. The empty can should be made from lightweight materials so it won’t add to the weight of the water. This will also make it easy to fill with water and store because a heavy can may make you procrastinate on watering plants because it will be a challenge.
The length and width of the spout is a very important aspect and the one you choose will depend on the type of plants you have. Small plants that need a little water will need a can with a narrow spout.
If your plants are on a window sill or ledge, a longer spout will make them easier to reach. The same goes for hanging plants that might be above your head.
Larger plants that don’t need a lot of water may need a sprinkle spout. Others that need a bigger drink will need a large spout that can reach into the roots and give adequate water.
Look for a watering can that is made from durable materials. Most are made from plastic because it is a lightweight and inexpensive option. Those that are molded to be one piece will have fewer joints to prevent leaking.
You will want one that can hold a lot of water without it stressing the can or distorting the shape. Any watering can should last you for a long time because you will only be using it a few times a week. So look for one that won’t break, bend, melt, or get discolored in the sun.
There are so many watering cans out there that make it easy to water all your indoor plants. It’s great that the variety allows you to choose the one that is best for whatever you have growing at home. If you are stuck trying to find the best one, our favorite is the Watering Can with Tulip Design.
It holds enough water for most indoor gardens and has an easy to use design. The tulip on the side makes it beautiful and the spray spout will ensure all your plants get enough water.